On Hands of Perfect Rolex Cosmograph Daytona 116500LN Replica Watch

Rolex Cosmograph Daytona 116500LN perfect replica watch, everything remains the same from polished steel hour markers with bright filling to proportions. The easy-to-read Chromalight display uses a long-lasting luminescent material that glows in a bright blue hue in the dark. Like any Rolex replica China Daytona chronograph, the word DAYTONA is printed in red and wrapped around the top of the small seconds at 6 o’clock.

The oyster case of the cheap replica watch is made of corrosion-resistant high-temperature alloy 904L steel. The Oyster case is the world’s first waterproof case. The system can tighten and lock the integral middle case and lower crown by tightening the bezel, the back cover and the screws of the case. Using this “Triplock” locking system, Daytona’s case can be as waterproof as a submarine hatch, with a minimum waterproof rating of 100m / 300ft.

The silver-rimmed sub-register on the luxury replica watch dial remains unchanged from the previous model. The bottom central sub-dial at 6 o’clock is the smaller running seconds sub-dial. The chronograph uses the sub-registers at 3 and 9 o’clock to the left and right of this sub-dial.

The chronograph function provides additional functions to the best replica watch, which is actually a stopwatch that enables the driver to time with an accuracy of up to one-eighth of a second. The mechanical chronograph complications used in the Cosmograph Daytona are designed with fewer parts than standard chronographs, making it a more reliable cheap replica stopwatch. As a column wheel chronograph with a vertical clutch mechanism, its start/stop and reset actions are more stable than the CAM actuation mechanism.

The large central seconds hand of the chronograph sweeps the dial very smoothly through the permanent movement known for Rolex replica watch. The small dial on the right side of the dial at 3 o’clock is a 30-minute counter, and at 9 o’clock, opposite the dial is a 12-hour counter. These three hands are operated smoothly via the chronograph buttons, which are located above and below the winding crown on the right side of the case.

The Oyster bracelet of the AAA replica watch is made of a three-piece oystersteel steel chain. The two outer links have a brushed surface, while the middle link has a polished finish. The links at both ends of the bracelet are connected to the polished lugs on the case. The Oyster double lock folding clasp is equipped with an Easylink 5mm extension chain, which can be quickly adjusted by 5mm to adjust the size of the bracelet.

Leave a Reply

Your email address will not be published. Required fields are marked *